angle of inclination
英 [ˈæŋɡl ɒv ˌɪnklɪˈneɪʃn]
美 [ˈæŋɡl əv ˌɪnklɪˈneɪʃn]
倾斜角；磁倾角
英英释义
noun
- (geometry) the angle formed by the x-axis and a given line (measured counterclockwise from the positive half of the x-axis)
双语例句
- Application and future of a new type belt conveyor with a large angle of inclination
带式输送机胶带运行偏斜的解决办法新型大倾角胶带运输机的应用与前景 - It can be see from the measured data that the deviation angle of inclination is about 1 40 °, slightly exceeding the permitted value.
现场检测数据显示，该抗风柱基础施工偏差略大于允许值，连接抗风柱的垫板约有140°倾斜。 - Research on relationship between bone traction and angle of inclination of cross section of shaft bone fracture
骨干骨折断面倾角与骨牵引关系的探讨 - The trainer can provide learners the simulant melting rate of electrode, check up whether the moving rate of electrode and the angle of inclination of electrode are in the ranges set in advance.
该装置能给学员提供焊条摸拟熔化速率，能检测焊条移动速率、焊条倾角、焊条与工件间的距离是否在予先设定的范围内。 - In this paper, the license plate number of a wide range of tilt angle calculation means to conduct a large number of experiments, the final choice point by calculating the characters to determine the angle of inclination of the plate.
本文研究了多种计算车牌号倾斜角的方法，进行了大量的实验，最终选择通过计算字符中心点来确定车牌的倾斜角。 - According to the degree in which the original ground surface has been denuded, the magnitude and the angle of inclination of the major principal stress can be calculated ( such as the magnitude of the intermediate principal stress).
根据原始地面遭剥蚀的程度，可以大致地估算最大主应力和中间主应力的量值和方向； - A novel routing protocol was proposed according to the angle of inclination of the nodes involved in wireless sensor network.
根据无线传感器网络中每个节点到汇聚节点的角度不同，提出一种新的角度路由协议。 - Angle of inclination of conveyor in degree.
为皮带运输机的倾角，度； - A surveying instrument consisting of a spirit level and a sighting tube; used to measure the angle of inclination of a line from the observer to the target.
由一个水平仪和一个观测管组成的测量工具；用来测量从观测者到目标的直线的倾斜角。 - When the speed is big, it is good to have a certain angle of elevation, on the contrary, it need not have the angle of elevation; it is suitable for the radial angle of inclination of the scavenging port to be 20 ° or so.
当转速较大时适合有一定的仰角，反之，则不必有仰角；扫气口的径向倾斜角设计在20°左右比较合适。